| c-1 | rod (0.5φ, 30mm) | 1 | \1,000 |
| c-2 | rod (0.5φ, 60mm) | 1 | \2,000 |
| c-3 | rod (1φ, 30mm) | 1 | \1,500 |
| c-4 | rod (1φ, 60mm) | 1 | \3,000 |
| c-5 | rod (2φ, 30mm) | 1 | \2,000 |
| c-6 | rod (2φ, 60mm) | 1 | \4,000 |
| c-7 | rod (3φ, 30mm) | 1 | \2,500 |
| c-8 | rod (3φ, 60mm) | 1 | \5,000 |
| c-9-1 | rod (3φ, 60mm) with lead wire (10cm) | 1 | \8,000 |
| c-9-2 | rod (3φ, 60mm) with lead wire (3cm) | 1 | \8,000 |
| d-2 | plate (10x10, 1t) | 1 | \1,500 |
| d-2-1-1 | plate (20x20, 0.10t) | 1 | \3,000 |
| d-2-1-2 | plate (20x20, 0.12t) | 1 | \3,000 |
| d-2-1-3 | plate (20x20, 0.07t) | 1 | \4,000 |
| d-2-2 | plate (25x25, 1t) | 1 | \3,000 |
| d-2-3 | plate (30x40, 1t) | 1 | \4,500 |
| d-2-4 | plate (40x50, 1t) | 1 | \6,000 |
| d-2-5 | plate (100x100, 1t) | 1 | \8,000 |
| d-2-6 | plate (100x100, 2t) | 1 | option |
| d-3-1 | plate (10x60, 0.1t) | option | |
| d-3-2 | plate (10x18, 0.2t) | option | |
| d-3-3 | plate (12x12, 0.1t) | option | |
| d-3-4 | disk(20P, 0.1t) | option | |
| d-4 | rod (50μmφ, 40mm) | 1 | \3,000 |
| d-5-3 | disk (5φ, 1t) | option | |
| d-5-4 | disk (10φ, 1t) | option | |
| d-64) | separator for fuel cell (50x50, 1t) both surface with ribs (1w,0.4d) |
1 | \25,000 |
| d-74) | separator for fuel cell (50x50, 1t) one surface with ribs (1w,0.4d) |
1 | \20,000 |
| k-1 | rod (3.0mmφ, 100mm) (by Tokai Carbon) GC 20 | 1 | the current price |
| k-2 | plate (38mm×26mm×1mm) mirror finishing(both sides) | 1 | \10,000 |
GC (Glass like Carbon)
| j-1a | Powder | 100mg | \5,000 |
| j-2a8) | long multiwalled nanotubes (5-10μmφ, 5-10mm) | option | |
| j-1b | Powder | 100mg | \5,000 |
| j-1c | Powder | 100mg | \5,000 |
| i | b-1 (GRC fibre) carbon fibre (10μmφ, 25mm) |
2 30 |
\10,000 |
| h-1-1 | plate (76x26, 1t) type 0 (GC) with one surface mirror finish |
1 | \19,000 |
| h-1-2 | plate (76x26, 1t) type 0 (GC) with both surfaces mirror finish |
1 | \20,000 |
| h-1-3 | plate (76x26, 1t) type 4 (PFC) with one surface mirror finish |
1 | \17,000 |
| h-1-4 | plate (76x26, 1t) type 4 (PFC) with both surfaces mirror finish |
1 | \18,000 |
| h-2 | disk (30φ, 1t) type 0 (GC) with one surface mirror finish |
1 | \18,000 |
| g-1 | manipulator(large), xyz,with 2-electrodes holder | 1 | \200,000 |
| g-2 | manipulator(small), xyz, with 1-electrode holder | 1 | \90,000 |
| g-3 | 4-electrodes holder for g-1 | 1 | \10,000 |
| f-1 | MPS5)-coating GRC (0.5φ,40mm) with connector without APTES6) precoating | 1 | \3,000 |
| f-2 | MPS-coating GRC (0.5φ,40mm) with connector with APTES precoating | 1 | \4,000 |
| f-4 | MPS | 10mg | \5,000 |
| e-1 | carbon fibre (5μmφ, 13mm) | 20 | \4,000 |
| e-23) | carbon fibre electrode made from e-1 | 1 | \10,000 |
| e-3-1 | carbon cloth (A4 size, 0.5t) | 1 | \3,000 |
| e-3-2 | carbon cloth (800x1000, 0.5t) | 1 | \25,000 |
| e-4-1 | carbon felt (A4 size, 2t) | 1 | \2,000 |
| e-4-2 | carbon felt (A4 size, 3t) | 1 | \2,500 |
| e-4-3 | carbon felt (A4 size, 5t) | 1 | \3,000 |
| e-4-4 | carbon felt (1000x1000, 2t) | 1 | \20,000 |
| e-4-5 | carbon felt (1000x1000, 3t) | 1 | \25,000 |
| e-4-6 | carbon felt (1000x1000, 5t) | 1 | \30,000 |
| e-5-1 | carbon paper (200x400, 0.4t) | 1 | \8,000 |
| e-5-2 | carbon paper (200x300, 0.4t) | 1 | \6,000 |
| e-5-3 | carbon paper (200x200, 0.4t) | 1 | \4,000 |
| e-6 | carbon spongy (50x50x10) | 1 | \3,000 |
| a-1 | rod (0.5φ, 80L) with oil1) | 5+1 connector | \8,000 |
| a-22) | rod (0.5φ, 40mm) with oil | 5 with connector | \8,000 |
| a-3 | rod (0.3φ, 80mm) with oil | 5 +1 connector | \12,000 |
| a-4 | rod (0.3φ, 40mm) with oil | 4 with connector | \8,000 |
| a-5 | rod (0.2φ, 50mm) with oil | 4 with connector | \8,000 |
| a-63) | rod (0.1φ, 40mm) with oil | 4 with lead wire | \12,000 |
| b-1-1 | rod (30-40μmφ, 30mm) without oil (GRC fiber) | 1 | \5,000 |
| b-1-2 | rod (60μmφ, 30mm) without oil (GRC fibre) | 1 | \3,000 |
| b-2 | rod (0.5φ, 40mm) without oil | 5 | \8,000 |
| b-3 | rod (0.3φ, 40mm) without oil | 5 | \8,000 |
| b-4 | rod(0.1φ,50mm) without oil | 5 | \10,000 |
| b-5 | graphite powder (3,20,50,100,200,500μm) | 1g | \2,000 |